Cage Drives Feature

  • Four-point contact precision main bearing, evenly distributes overturning loads.
  • Steel housing / Designed to bolt-up to any existing unit for retrofit.
  • Designed per AGMA and ABMA standards for minimum 100 year bearing life.
  • No lower pinion bearing required.
  • Primary parallel helical gearmotor with shear
    pin.
  • Secondary planetary speed reducer with pinion mounted on output shaft.
  • Precision gear, oil lubricated.
  • Hydraulic Torque Box with Dial Indication.
  • 5-year Warranty (less motors and paint)
  • 10-year Warranty Main Gear
  • Stainless Steel or Ductile Cast Iron Drive Housings are options

 

Shaft Drives Feature

  • Four-point contact precision main bearing, evenly distributes overturning loads.
  • Steel housing / Designed to bolt-up to any existing unit for retrofit.
  • Designed per AGMA and ABMA standards for minimum 100 year bearing life.
  • No lower pinion bearing required.
  • Primary parallel helical gearmotor with shear
    pin.
  • Secondary planetary speed reducer with pinion mounted on output shaft.
  • Precision gear, grease or oil lubricated.
  • Hydraulic Torque Box with Dial Indication.
  • 5-year Warranty (less motors and paint)
  • 10-year Warranty Main Gear
  • Stainless Steel or Ductile Cast Iron Drive Housings are options

 

  • Precision main gears and bearings allow for a more robust drive unit as opposed to cast iron strip liner drives, which can have inclusions that will weaken the gearing and housing. Design life for PRE Drives is a calculated L10 life in excess of 100 years as the standard.
  • Hydraulic torque control, measured by the reaction of the rotation of the upper gear housing, offers a more accurate measurement of torque, along with eliminating the use of worm gears or
    mechanical overload devices, which can both seize up over time.
  • Planetary and Helical speed reducers allow for high efficiency
    designs, which in turn can reduce power consumption, thus
    saving the plant money in electricity costs.
  • Direct coupled components eliminate the use of chains and sprockets, which makes maintenance of your drive unit simpler.
  • Elimination of the use of a lower pinion bearing, which is a
    common failure point in competitors’ drive units.
  • Drive units can be provided with torques in excess of 1 million foot-pounds of continuous torque.
  • Available On-site, Turnkey Inspection, Repair, and Replacement Services.
  • 5 year Standard Warranty on Precision Bearing Drives (less motors and paint)

 

TELL US ABOUT YOUR PROJECT

Copyright © 2022 All Rights Reserved   |  Web design and Marketing by i4 Solutions